Management Software and Micro-GC Process Software
Soprane Software is an easy and powerful user interface dedicated to the μGC. It is composed of :
- All the necessary utilities for data management
- Control of a large number of external events such as: multi-way valves, electrovalves, contacts and alarms
- Transfer of data at the end of the analysis in different modalities.

These features make the software SOPRANE ideal also for continuous analysis.

With Soprane is possible:

• Check all the instrument parameters such as temperatures, pressures, sampling, analysis time
• Set up sequence and self-calibration analyses
• Have an immediate access to the last analysis results, to the result series and to the concentration trend
• Proceed to the signal integration and to the concentration identification and calculation
• Issue a single report with the results of all analytical channels
• Read external data (eg. Temperature, pressure, flow, etc.) coming from other measurement systems connected to the line and insert them in the final analysis report
  
• Calculate the chemical and physical properties (such as calorific power, density, etc.).
• Perform customized post-run calculations
• Transfer the results at the end of the analysis through the most common Modbus serial protocols or through analogical signal (4-20mA)

- 4-20mA: from 4 to 16 analogical signals related to the concentration of the measured components

- MODBUS: results in real time to an another PC through RS-232

- SERIAL: results at the end of the analysis to an another PC through RS-232 

- OPC: It is an industrial standard protocol that supports OLE for Process Control and allows communication between the Micro-GC and the control and automation systems.

- ALARM AND RELAY TRANSMISSION: open/closed contacts in case of special events (minimum or maximum alarms, timed events, etc.).